Wood Burning Stoves And Fireplaces
- Clean out the burning chamber well. Use a soft brush to clean the insulation panels and baffle plates so as not to damage them.
- Leave the air supply open when you are not using the stove so that air can circulate in the stove and chimney to prevent moisture building up in the unit.
- If your chimney has a Tee, the inspection cap can be opened to remove any creosote and/or condensation that might have collected there.
- If there are signs of rust on the cast iron or steel parts inside the burning chamber you could scrape the area lightly with a wire brush, if necessary, and spray some light maintenance oil. If you do this, it is important not to damage any other parts in the fireplace such as insulation panels, glass, sealing rope etc.
- Remember, it is important to sweep your chimney regularly. The frequency depends mainly on the quality and quantity of the wood you burn.
- Oil the springs and locks on the door.
- As you annually check the membrane on your roof, you should also check the waterproofing around your chimney and, if necessary, paint around it with a liquid membrane.